<address id="19rrz"><form id="19rrz"><th id="19rrz"></th></form></address>

            <form id="19rrz"><nobr id="19rrz"></nobr></form>
              <em id="19rrz"></em>
              <form id="19rrz"><nobr id="19rrz"><th id="19rrz"></th></nobr></form>

              <em id="19rrz"><span id="19rrz"><th id="19rrz"></th></span></em>

                  帕智電子(上海)有限公司

                  400 0800 882

                  產品中心

                  當前位置:首頁 > 產品中心 > 圣邦微 > LED驅動器 > 白光LED 驅動器 > SGM3122

                  產品中心

                  SGM3122

                  White LED Charge Pump Current Source with PWM Brightness Control
                   
                  White LED Charge Pump Current Source with PWM Brightness Control
                  GENERAL DESCRIPTION

                  The SGM3122 is a charge pump with PWM brightness control for white LED supplies in LCD display backlight applications. The supply voltage ranges from 2.7V to 5.5V, it is ideally suited for all applications powered by a single Li-ion battery cell or three to four NiCd, NiMH, or alkaline battery cells.

                  The device provides a constant current for each LED, and the initial current value can be set by an external resistor. High efficiency is achieved by utilizing a 1×/1.5× fractional conversion technique in combination with very low dropout current sources.

                  The SGM3122 is capable of driving up to four channels of LEDs at 30mA per channel from a 2.7V to 5.5V input. Additionally, the current controlled charge pump ensures low input current ripple and EMI. A low external part count (two 0.47μF flying capacitors and two small 1μF capacitors at VIN and VOUT) makes this part ideally suited for small, battery-powered applications.

                  The SGM3122 is available in a Green TQFN-3×3-16L package, and is rated over the -40 to +85 temperature range.

                  PIN CONFIGURATIONS

                  Snap3.png

                  FEATURES
                  • Input Voltage Range: 2.7V to 5.5V

                  • Drives up to 4 LEDs at 30mA Each

                  • LED Brightness Control Through PWM Control Signal

                  • High Efficiency by Fractional Conversion with 1× and 1.5× Modes

                  • Switching Frequency: 1MHz

                  • Regulated Output Current with 0.5% Matching

                  • Internal Soft-Start Limits Inrush Current

                  • Low Input Ripple and Low EMI

                  • Over-Current and Over-Temperature Protected

                  • Under-Voltage Lockout with Hysteresis

                  • Available in Green TQFN-3×3-16L Package

                  APPLICATIONS

                  Cellular Phones
                  Smart Phones
                  Digital Cameras
                  Handheld PCs
                  Camcorders
                  PDAs
                  Keypad Backlight

                  ORDERING INFORMATION
                  Part NumberStatusPackagePinsPb-FreeTemp Range
                  SGM3122YTQ16G/TRProductionTQFN-3×3-16L16Y-40℃ to +85℃






                   

                  挖矿网